Power At The Touch Of A Button

With an engine control system from Martin Energy Group, you receive a complete range of comprehensive engine protections and generator management possibilities. A wide range of I/O modules are available, thus allowing you to control, monitor, and log hundreds of relevant parameters around your power plant. Programmable Logic Control (PLC) functionality is also built into the main controller, enabling complex control processes to fit your needs. By allowing you to control and manage complex power stations quickly and effectively, our engine /generator controls give you the ability to generate affordable energy.

Our engine control systems offer a wide range of customer-friendly equipment such as detachable color displays. Various types of communication interfaces (J1939, Modbus, RTU) are ready to provide support of engine management. The systems are scalable system in terms of peripheral I/O modules, connected to the main unit via CAN bus. Units can be configured for Baseload, Import/Export, TempByPower, Peak Shaving, Island Mode, or voltage and PF control (AVR).

Our engine controls are complete with protection protocol for engine and generator with start-to-stop functions. The controls handle a wide variety of fields –from single genset units to complex sites with many gensets, incoming mains, and bus ties. For complex sites, engine controls are simply interconnected with CAN-line, minimizing the need for additional wiring. Our easy-to-read, graphical user interface is not only customized to the needs of each individual installation, but also is fully capable of Internet communications for remote control and monitoring from any location around the globe. The screen Editor, the “display with a difference,” allows you to personalize the interface on your full-color display by managing screen type, selecting instruments, and creating backgrounds from a toolbox of graphical elements.

 

 

 

 

Intelivision Download

 

 

 

 

 

 

InteliVision 17 Touch Description

The new InteliVision 17 Touch is a seventeen-inch touchscreen display unit for use with the range of ComAp gen-set and generator controllers. It features an extended operating temperature range and UL certification for use in complex installations. Optimized for ease of use, installation and configuration, the InteliVision 17 Touch allows the monitoring and control of multiple controllers from a single screen, with the option of directly controlling gen-sets or breakers. The InteliVision 17 Touch comes with SCADA software enabling users to freely configure the screen with different on-screen components, such as meters, graphs, control buttons and many more. The software also enables users to check the history of multiple controllers and change set-points from one screen. There is also IGS-LOG software preinstalled and it is “FREE” of charge. The InteliVision 17 Touch is designed to mount into a panel in a power distribution center or mount onto a wall using the VESA standard mount (optional). Communication is available via standard interfaces such as RS232, Ethernet and USB.

Controller Benefits

  • UL Certification
  • Extended temperature range ( from -20* C up to 60* C )
  • Front panel protection to IP65 NEMA4 standard
  • Robust, industrial design with passive cooling
  • LED Backlight, high resolution screen
  • Two easy access USB ports
  • Over and under voltage protection
  • Complimentary IGS-LOG included
  • Monitor and control any connected ComAp controller
  • Monitor and Control all GCB’s and MCB’s
  • Change set-points from one screen
  • View history logs from all connected controllers
  • Full-screen, and configuration modes
  • Screen can be locked with a PIN

Typical Applications

Combined Heat and Power (CHP) applications

  • Connection via I-LB+ (RS232, USB), via Internet Bridge-NT or directly using RS-232, Ethernet or USB (depends on controller type)
  • Status of complete CHP installation displayed on one screen
  • Multiple detailed screens available

Multiple Gen-sets / Controllers in one location

  • Connection via I-LB+ (RS232, RS 485, USB), via Internet Bridge-NT, or directly using RS-232 or Ethernet (depends on system installation)
  • Status of multiple gen-sets and mains controllers is displayed on one screen
  • Multiple detailed screens available

Unit Specifications

System

  • Processor: Onboard Intel Celeron 827E, 1.4 GHz
  • Memory: DDR3 SODIMM 4GB
  • LCD/CRT Controller: Integrated in Intel QM67
  • Ethernet: 10/100/1000 Base-TX, 2 x RJ-45
  •  I/O Port: 4 x RS232, 6 x USB2.0, VGA, Line-in/out
  • Storage Disk Drive: 16GB SSD industrial

Mechanical

  • Construction: IP-65/ NEMA4 (front)
  • Mounting: Panel/ VESA100/ Rack/ Wall
  • Dimensions: 420mm x 358mm x 97mm
  • Cut-out: 405mm x 339mm
  • Gross/Net Weight: 10.5 kg / 8.1 kg